三層共擠吹膜機-GF-L3C-MT

              分類: 吹袋生產線

              尚宏機械工業有限公司

              尚宏機械工業有限公司
              國家: 臺灣
              電話: 886-5-220-0506
              傳真: 886-5-220-1955
              聯絡人: 黃先生

              A-B-C 3 LAYER CO-EXTRUSION FILM INFLATION MACHINE

               

              MODEL

              GF-L3C-MT-1800

              FEATURE

              MATERIAL TO BE USED

              LDPE / LLDPE / mLLDPE / HDPE / EVA / PP

              MAX. FILM WIDTH

              FLAT FILM 1800mm ; WITH GUSSET 2500mm (5000mm OPEN WIDTH)

              FILM THICKNESS

              0.020 ~ 0.20mm (THINNER or THICKER GAUGE REQUIRED, TO BE SPECIFIED BY BUYER)

              LAYER RATIO

              1:1:1 TO 1:3:1

              EXTRUSION OUTPUT

              Max. 650kg/hr

              MAX. PRODUCTION CAPACITY

              550kg/hr for 1:1:1
              480kg/hr for 1:2:1
              400kg/hr for 1:3:1

              REAL PRODUCTION OUTPUT

              REAL PRODUCTION OUTPUT DEPENDS ON THE MATERIAL, FILM SIZE, OPERATION CONDITIONS, SKILL & EXPERIENCE

              THICKNESS TOLERANCE

              +/- 3 to +/- 10%
              Depends on the material compound, film thickness & operation conditions

              EXTRUDER
              (THREE SETS)
               

              SCREW DIAMETER
               

              75mm x 2
              85mm x 1

              SCREW L/D RATIO

              30:1

              DRIVING MOTOR

              100HP X 2, INVERTER CONTROL
              125HP X 1, INVERTER CONTROL

              EXTRUSION CAPACITY

              75mm : Max. 200kg/hr
              85mm : Max. 250kg/hr

              CO-EXTRUSION DIES

              ψ400mm (or to be specified by buyer), EUROPEAN DESIGN
               

              CONTROL PANEL
               

              TYPE

              INDEPENDENT TYPE SWITCH BOARD (BOX), CE STANDARD

              TEMP. CONTROL

              PID TEMPERATURE CONTROLLERS, COLD-START PROTECTION
               

              COOLING UNIT

              EXTERNAL COOLING

              FULL-AUTOMATIC THICKNESS CONTROL, EUROPEAN DESIGNED FLYER AIR RING
              EUROPEAN HMI CONTROL

              INTERNAL COOLING

              EUROPEAN DESIN IBC DISKS
              EUROPEAN HMI CONTROL

              AIR BLOWER

              20HP, INVERTER CONTROL

              TAKE-UP UNIT

              FIXED TOWER, HEIGHT

              12.5 M

              OSCILLATING HAUL-OFF

              HORIZONTAL TYPE, SITTING ON SLEWING RING BEARING,
              OSCILLATING IN NEARLY 360°, HMI CONTROL

              TAKE UP ROLLER

              1900mm

              TAKE UP MOTOR

              3HP, INVERTER CONTROL

              TAKE-UP SPEED

              MAX. 60M/min or TO BE SPECIFIED BY BUYER

              BUBBLE GUIDE

              CAGE TYPE, UP/DOWN BY MOTOR DRIVEN
              OPEN/COSE BY MOTOR DRIVEN, AUTO-ADJUST BY WIDTH CONTROL

              STEADY PLATE

              MOTOR DRIVEN TYPE , MADE OF ALUMINUM ROLLERS

              GUSSET BOARD

              450mm DEPTH, MOTOR DRIVEN

              GUIDE UNIT

              TWO SETS A.C. MOTOR + INVERTER

              WINDING UNIT

              SCGC TYPE

              SURFACE / CONTACT / GAP / CENTER, 4-IN-1, FULL-AUTOMATIC, HMI CONTROL, TWO STATION WINDER

              BOBBIN CHANGE

              PNEUMATIC SYSTEM

              FILM CUTTING

              PNEUMATIC SYSTEM

              EFFECTIVE WIDTH

              1800mm

              WOUND-UP DIAMETER

              Max. 800mm

              SURFACE WINDING

              2HP, INVERTER CONTROL

              CONTACT/GAP/CENTER WINDING

              3HP, INVERTER CONTROL, SERVO MOTOR FOR POSITIONING

              AIR SHAFTS

              3” x 3 PCES ON EACH WINDING STATION, TOTAL 6 PCES ;
              6” AIR SHAFTS or 6” AIR CHUCKS by extra charge

              SIDE-OPENING

              TWO SETS, AIR BLOWING TYPE

              SLITTING DEVICE

              SINGLE-BLADE UNIT X 2 SETS, DOUBLE-BLADE UNIT x 2 SETS

              TENSION CONTROL

              AUTOMATIC TYPE, WITH LOADCELLS

              UNLOADING UNIT

              HYDRAULIC SYSTEM, ONE ON EACH SIDE

              OTHERS TO BE INCLUDED

              - 4-COMPONENTS GRAVIMETRIC DOSING UNIT x 3 SETS
              - EXTRUSION CONTROL (YILED & GRAM PER METER CONTROL)
              - 4-IN-1 MATERIAL AUTO LOADING SYSTEM* 3 SETS
              - PRESSURE & MELTING TEMP. GAUGE x 3 SETS
              - AUTO FILM GAUGING SYSTEM WITH OSCILATING RING TO WORK WITH AUTO AIR RING
              - AUTOMATIC WIDTH CONTROL
              - MONITORING & SUPERVISING SYSTEM, WITH 15” HMI SCREEN, TO CONTROL MATERIAL RECIPES / PRODUCTION OUTPUT / FILM WIDTH / FILM THICKNESS / IBC.
              - EDGE POSITION CONTROL (EPC)
              - AIR CHILLING SYSTEM, WATER COOLING TYPE (WITH COOLING TOWER & WATER PUMP)
              - EDGE-TRIM WINDER, 2-SPINDLE TYPE

              OPTIONS

              5.0 KW CORONA TREATER, HEAT-SLITTING UNIT, 6” AIR SHAFTS or 6” AIR CHUCKS, CENTER POSITION CONTROL(CPC), AIR COOLING TYPE AIR CHILLER ….etc.

              REMARKS

              * Final specifications of the co-extrusion machine depend on the film application, material to be used, accepted thickness tolerance, and your special requirements.